CAN/EtherNet

Research Centre

                                           CERC Home

[ Home ]

View our Assembly Cell Live!

The following are the papers we have published in the past. It will be continuously updated from time to time. If you would like to have a copy of these papers, please contact us.

  1. "In-Vehicle Communication Networks;, R.T. McLaughlin, Published thesis to fulfil requirements for MSc. by research, University of Warwick, 1993.

  2. "The Immunity to RF Interference of a CAN System", R.T. McLaughlin, IEE Colloquium on the integrity of automotive electronic systems, 22 March '93.

  3. "EMC Susceptibility Testing of a CAN Car", R.T. McLaughlin, SAE WorldwidePassenger Car Conference and Exposition, Dearborn, Michigan, 1993, SAE932866.

  4. "Autos Carry The CAN - Controller Area Network (CAN) for IndustrialApplications", R.T. McLaughlin, S.B. Khoh, Assembly Automation Vol.14 No.1, 1994.

  5. "A SLIO (Serial Link Input/Output) CAN Implementation", R.T. McLaughlin, S.B. Khoh, SAE Symposium on Future Transportation Electronics: Multiplexing and In-Vehicle Networking, 15 August 1994, Dearborn, Michigan, USA,SAE 941661.

  6. "Low Cost SLIO CAN Based Body Control System", Dr K.W. Young, R.T. McLaughlin, S.B. Khoh, 1st. International CAN Conference, Mainz 1994.

  7. "Application of Controller Area Network in Entertainment Control Systems", R.T. McLaughlin, S.B. Khoh, Proceeding of Reproduced Sound 10 Conference, Institute of Acoustics, Windermere, Nov 1994.

  8. "CAN as the Transport Mechanism for Audio, Video, & Lighting Control Systems", Richard McLaughlin & S.B.Khoh, Proceedings of the Audio Engineering Society Conference, Paris, Feb 1995.

  9. "CAN Controlling From Cars to X-rays", Richard McLaughlin, IEE Review- May 1995.

  10. "DeviceNet Interoperability and Compliance", Dr. Ken Young, Richard McLaughlin, S.B.Khoh, Proceedings 2nd International CAN Conference, Sponsored by CAN in Automation, London, Oct 1995.

  11. "Introduction to DeviceNet", Richard McLaughlin, Proceedings of Fieldbus 95, Institute of Measurement and Control, London, 24 Oct 1995.

  12. "A Feasibility Study of CAN Technology in Body Electronic Control Systemst", Richard McLaughlin, S.B.Khoh, IMechE Paper number C498-028, Autotech 95, Birmingham, Nov 1995.

  13. "Controller Area Network (CAN) - The Industrial Data Bus", Richard McLaughlin, IEE EC&C Divisional Lecture, Newcastle University, 4 Dec 1995.

  14. "DeviceNet System Planning, Performance Analysis, System Monitoring and Maintainance", Richard McLaughlin, Richard Piggin, Proceedings 3rd International CAN Conference, Sponsored by CAN in Automation, Paris,Oct 1996.

  15. "DeviceNet Conformance Testing Procedures and Experiences", Richard McLaughlin, K.H.Tang, Dr. James Moyne, Jigney Shah, Proceedings 4th International CAN Conference, Sponsored by CAN in Automation, Berlin, Oct 1997.

  16. "DeviceNet Modelling on DeviceNet Network", Dr. James Moyne, Jigney Shah, Richard McLaughlin, K.H.Tang, Proceedings 4th International CAN Conference, Sponsored by CAN in Automation, Berlin, Oct 1997.

  17. "DeviceNet Interoperating Test Procedure", Kiah Hion Tang, Proceedings 5th International CAN Conference, Sponsored by CAN in Automation, San Jose, Oct 1998.

  18. "DeviceNet Physical Layer Testing", Kiah Hion Tang, Ricahrd McLaughlin, Proceedings 6th International CAN Conference, Sponsored by CAN in Automation, Turin, Oct 1999.

  19. "DeviceNet Physical Layer Design and Conformance Testing", Kiah Hion Tang, Ricahrd McLaughlin, Drives and Controls Conference Paper, March 2000.
 

 

[ Home ]

Send mail to e.dsouza@warwick.ac.uk with questions or comments about this web site.
Copyright © 2000 CAN/EtherNet Research Centre (CERC)
Last modified: 26 April, 2000 10:33 +0100