|
| |
|
Free Tools
Note: These are unofficial tools. We hold no responsibilities for any damage or
mis-leading due to these tools. Please send email to us, we appreciate any suggestions and
recommendations.
 |
CAN-Calculator
The CAN calculator helps to calculate the baud-rate, sampling point, and frequency of a CAN controller. It is as easy as
key-ing in any two of the parameters, and it will then calculate the third parameter for you. For instance if you require 500Kbaud with sampling point of 80%, key these values in two of the boxes provided and press the "Calculate"
button, it will then calculate the ranges of possible system frequencies. Download it for free!
|
|
DeviceNet Conformance Test Log Interpreter
If you are using the DeviceNet Conformance Test software, and find that it is difficult to interpret the log file, this tool helps you to interpret the raw CAN data into DeviceNet.
Note that this tool assume 8-bit class ID and 8-bit Instance ID only. Work is being done to include 16-bit class and instance IDs.
|
|
CAN Bit-Timing Calculator for
Siemens Semiconductors' CAN controllers
This is the link to Infineon site, it provides installable programme for their CAN chips such as C505/515, C167, etc. |
Document Files / Order Forms
Note: For compatibility, these files are saved in Word 6/95 format.
If you
are ordering the DETSC services, such as the
Pre-Test, STC or EDS file generation, consultation, etc. you
may download this form, fill in details, and post or fax to us.
If you
are ordering the DeviceNet training at DETSC, please download this form, fill in details, and post or fax to us.
Use this form to submit the terms
of Agreement to ODVA. It must be sent via post.
Use this form to submit the order
for a DeviceNet Independent Composite Test.
Use this
checklist to verify if you have prepared enough materials, resources, and
information for the Composite test.
If you want to order the DeviceNet
Specification (hard copy or CD-ROM), please download this form. The current version is Release 2.0
Errata 2. The order must be post of fax to ODVA.
|
DeviceNet
Protocol Conformance Test Software Order Form
("Software.pdf", 27K) |
If you want to buy the DeviceNet
Protocol Conformance Test Software (which runs on Windows 3.x and Windows 95) and to test
your products in-house, please download this form, fill in details, and send it to
ODVA.
|
DeviceNet
Family Product Letter Approval Form
("Letter.pdf", 27K) |
If you want to declare your product
as a family of others that have been certified as DeviceNet Conformance, please
download this form.
|
| |
|